This update adds:

	Adds extended comprehensive data transfer capabilities.
	Adds additional data fields to calibration screens.
	Resolves several small operational issues.

NOTE: This update requires that you run UPDATE5.EXE found in your \GMSW5 directory after installation of this update. This utility converts your v5.0.1 or v5.0.0 data files to file structures used by 5.0.2. Failure to update your file structures will result in operational errors. Just double click UPDATE5.EXE and follow the directions to complete the update. It just takes a minute to work. 

This update includes these changes from prior updates:

	Resolves issues with the PM Manager deletion of devices.
	Resolves issues with the PM Data screen.
	Resolves issues with the Device Manager display of the issued person following calibrations, issues, or additions.
	Revised WSSETUP.EXE to correct errors in link creation.
	Several small tweaks to improve general performance and operation.

WSSETUP Issue: In the duplication of GMS for Windows 5 CDs, a duplication issue caused installation files for WS Setup on some CDs to be corrupted. If you have experienced any issues running GMSW 5 from workstations configured with WSSETUP, please download this version of WSSETUP and reinstall it on each involved workstation. Click here to download WSSETUP.EXE

This update adds:

	Addition of security features to Device Inventory Action buttons.
	Further improvements to Crib History.
	Several small tweaks to improve general performance and operation

This update includes these changes from all prior updates:

	Corrections to Archive to resolve limited issues in some installations. (4.0.6)
	Corrections to resolve Crib History corruption under specific circumstances. (4.0.6)
	Corrections to status change feature in Repair Screen. (4.0.5)
	Added Access to Web for Tech Support & Updates. (4.0.5)
	Added Product Catalog (4.0.5)
	Added 2 new reports requested by many of our users (4.0.5)
	Reindex updated to repair duplicate key errors. (4.0.4)
	Revised User Guide. (4.0.4)
	Revised Getting Started Guide (4.0.4)
	Revised Help Files (4.0.4)
	Three new reports in Report Manager (4.0.4)
	Modifications to Report Manager Screens (4.0.4)
	Many small tweaks to improve general performance and operation (4.0.4)
	Receive to Calibration Screen to receive devices for calibration by setting status to Calibration. (4.0.3)
	Ability to have GMS automatically set As Left, As Received, Calibration Results, and Status based upon Test Data values. (4.0.3)
	Ability to have GMS print certs for any range of dates, locations, assignments, types, or customers from Today's Certs. (4.0.3)
	Ability to have GMS print labels for any range of dates, locations, assignments, types, or customers from Today's Labels. (4.0.3)
	Ability to have GMS view files of certs for any range of dates, locations, assignments, types, or customers from Today's Certs. (4.0.3)
	Ability to have GMS generate recall letters for customers from Today's Calibrations. (4.0.3)
	Modifications to Report Manager Screens. (4.0.3)
	Correction to Calibration Info Screen where Status and Location are not properly displayed during calibration. (4.0.2)
	Ability to have GMS automatically set As Left or As Received based upon Test Data values (4.0.2)
	Ability to have GMS automatically print Nonconforming Gage Report automatically during calibration (4.0.2)
	Correction to Report Manager for some systems under Win ME. (4.0.2)
	Correction to AIAG Linearity where tolerance values of zero are used. (4.0.1)
	Ability to turn off display of the Device Inventory screen on startup (4.0.1)
	Revision to the Repair Info screen to allow saving records for devices under repair but not yet completed.  (4.0.1)
	Addition of several reports.  (4.0.1)
	Correction of an issue with use of the Issue / Return button on Device Inventory when the crib issue table is empty. (4.0.1)
	Addition of a utility to automate reset of GMS's internal user limitations.  (4.0.1)

Update changes by update number:

	Correction to Search / Replace options. (3.0.8)
	Addition of Automatic Return to Crib Option following calibration to Calibration Test Data List (3.0.8)
	Correction to error handling routine that caused GMS to go into a loop following a specific error sequence. (3.0.8)
	Addition of several reports. (3.0.8)
	Correction to Calibration WorkSheets Report. (3.0.7)
	Addition of Sort Option to Calibration Test Data List (3.0.7)
	Addition of several new reports. (3.0.7)
	Correction to PM Update in Simply to properly update the PM Devices table. (3.0.6)
	Correction to display of due dates in Crib (3.0.6)
	Correction to display of calibration past due warnings in Crib experienced by some users. (3.0.6)
	Correction to display of large fonts on when used on some systems. (3.0.6)
	New Today's Calibrations window with numerous new features to order data (3.0.5)
	New graphics windows throughout (3.0.5)
	New version of Graphics Server for graphics display which resolves display problem of graphs experienced by some users. (3.0.5)
	Correction to Advanced Interface problem with Fixed Thread Rings (3.0.4)
	Resolution to several random issues associated with Report Manager under older versions of Win 95. (3.0.3)
	Correction to the report for AIAG Linearity Studies. (3.0.3)
	Miscellaneous fixes and minor new features.  (3.0.3)
	Incorporation of the bug fix for Intel PII (100mhz internal bus) 333 to 450mhz machines. This bug produced a "Divide By Zero Error" when you started GMS for Windows. You no longer have to use the SLOW.EXE patch included in the last Update. We still include SLOW.EXE for your use with other software affected by Intel's problem.  (3.0.3)
	A new import data feature to allow import of device data from other packages.   (3.0.2)
	Modifications to file export routine to support more complex exports. (3.0.2)
	Miscellaneous fixes.  (3.0.2)
	Correction of a Calibration Master out dated warning  (3.0.1)
	Correction of a change of status to "IN" during calibration  (3.0.1)
	Addition of new logic to the "Days Left" and "Date Due" indicators on the Device Inventory screen to address user requests for various combinations of conditions with Usage Intervals  (3.0.1)

This update adds:

	Corrections to the Contents feature for use under Windows 3.x.
	Additional corrections to content for all versions.

This update adds:

	Corrections to the Contents feature for use under Windows 3.x.
	Additional corrections to content for all versions.

This update adds:

	Corrections to the Contents feature for use under Windows 3.x.
	Additional corrections to content for all versions.

This update adds:

	Modifications to several reports overlooked in the initial release to support Y2K dates.
	Miscellaneous corrections and improvements.